Complete Parts List: Mitsubishi Overhaul Full Head Gasket Set

Complete Parts List: Mitsubishi Overhaul Full Complete Head Gasket Set For 4D33 New Type ME999995

What is an Overhaul Head Gasket Set and why it matters for the 4D33

The term Overhaul Head Gasket Set refers to a comprehensive kit designed to replace all the sealing components required during a full engine head overhaul. For the Mitsubishi 4D33 New Type, WTA’s Mitsubishi Overhaul Full Complete Head Gasket Set for 4D33 New Type ME999995 provides the complete range of gaskets and seals engineered to restore engine compression, prevent coolant and oil leaks, and ensure correct sealing surfaces following cylinder head work. Using a complete kit reduces the risk of missed components, speeds up repair time, and helps avoid repeat failures — critical factors when performing a precision engine rebuild.

What's included in the Mitsubishi Overhaul Full Complete Head Gasket Set (ME999995)?

WTA’s kit is marketed as a full overhaul solution and typically includes the following core components. The list below is a logical representation of what a complete head gasket overhaul set for the 4D33 New Type will contain:

• Primary cylinder head gasket(s) (multi-layer steel or composite depending on specification)
• Valve cover gasket
• Intake manifold gasket(s)
• Exhaust manifold gasket(s)
• Valve stem seals
• Camshaft seals / O-rings
• Thermostat housing gasket
• Water pump gasket
• Oil pan gasket (if included in full overhaul packs)
• Timing cover gasket and seals (if applicable)
• Various O-rings, dowel seals and washers necessary for head assembly

Exact counts and part numbers vary by supplier and by engine revision. Always confirm the set contents against your engine serial number and workshop manual before purchase and installation.

How the Overhaul Head Gasket Set ensures precise engine rebuilds

A proper engine overhaul requires restoring all sealing surfaces to OEM or better performance. The key functions of the Overhaul Head Gasket Set are:

• Restore combustion chamber sealing to prevent blow-by and loss of compression.
• Maintain separation between coolant and oil passages to avoid contamination.
• Seal mating surfaces (manifolds, valve cover, timing cover) to prevent external leaks.
• Replace aging rubber and elastomer seals that harden and crack over time.

Using a matched kit like the WTA ME999995 reduces variability in material compatibility and dimensional accuracy, improving first-time-fit and long-term reliability.

Materials and manufacturing quality: what to look for in an Overhaul Head Gasket Set

Material selection determines a gasket set's durability under temperature, pressure, and chemical exposure. For the Overhaul Head Gasket Set for the 4D33 New Type, consider the following material expectations:

• Head gaskets: multi-layer steel (MLS) or composite with fire rings for high-temperature and high-compression engines.
• Valve seals: durable nitrile or Viton variants for oil resistance and longevity.
• Manifold gaskets: graphite or multi-layer metal as appropriate for exhaust and intake heat ranges.
• O-rings and elastomers: high-quality nitrile or fluoroelastomer compounds for coolant and oil resistance.

WTA’s kit emphasizes durable, high-quality seals to support reliable performance during and after overhaul — a key benefit cited for ME999995.

Compatibility and verification for Mitsubishi 4D33 New Type

Before purchasing an Overhaul Head Gasket Set, verify the engine model and serial details. The Mitsubishi 4D33 engine has variants and New Type designations that affect gasket dimensions and component fit. Steps to confirm compatibility:

1. Check the engine code stamped on the block or in the vehicle service documentation.
2. Cross-reference the ME999995 kit part number with supplier catalogs and Mitsubishi parts diagrams.
3. Confirm cylinder head machining tolerances (surface finish, deck height) match gasket manufacturer recommendations.

If in doubt, consult a Mitsubishi dealer or an experienced rebuild shop for verification. Using the wrong gasket can lead to leaks or premature failure.

Installation best practices when using an Overhaul Head Gasket Set

To maximize the benefits of a full overhaul set, follow these industry-standard installation practices:

• Always clean all mating surfaces to bare metal and remove old gasket material.
• Inspect the cylinder head and block for warpage; machine if beyond tolerance.
• Use new head bolts or studs where required; torque to the manufacturer’s sequence and specification.
• Replace associated ancillary components (thermostat, water pump, timing belt/chain tensioners) when accessible during overhaul.
• Use recommended lubricants and sealants only where specified by the kit or manufacturer.

Correct installation reduces the chance of rework and extends the engine lifecycle.

Performance and durability expectations for ME999995

A high-quality Overhaul Head Gasket Set should withstand repeated thermal cycles, maintain compression over time, and resist chemical attack from coolant and oil. Typical performance indicators for ME999995-quality sets include:

• Retention of compressive force after repeated heat cycles
• No ingress of coolant into oil or combustion chambers
• Resistance to gasket creep and blowout under designed cylinder pressures

Warranty periods and material specifications from the supplier are useful metrics for comparing durability between kits.

Comparative table: Typical component coverage in Overhaul Head Gasket Sets

Cost-benefit analysis: Why buy a complete Overhaul Head Gasket Set?

Buying a complete kit like WTA's ME999995 typically costs more upfront than individual gaskets, but brings several savings and advantages:

• Reduced downtime: all necessary parts are on hand for the job.
• Lower risk of repeat failures due to missing or incompatible parts.
• Consistency of materials and dimensions across sealing components.
• Often better warranty coverage and supplier support for full kits.

For professional rebuilders and proactive fleet maintenance, the kit approach often yields a lower total cost of ownership.

Brand advantages: Why choose WTA’s Mitsubishi Overhaul Full Complete Head Gasket Set (ME999995)?

When comparing suppliers, WTA’s ME999995 stands out for several reasons relevant to purchasers of an Overhaul Head Gasket Set:

• Engine-specific fit: Designed for Mitsubishi 4D33 New Type, reducing fitment issues.
• Comprehensive kit contents: Minimizes the need to source additional seals mid-repair.
• Quality materials: Emphasis on durable gasketing materials suited for overhaul applications.
• Technical support: Brand-backed guidance for fitment and torque procedures.

These advantages translate to more predictable rebuild outcomes and higher confidence for technicians and owners.

Common installation pitfalls and how the right Overhaul Head Gasket Set helps avoid them

Typical mistakes during head gasket replacement include improper surface prep, reusing old bolts, incorrect torque sequence, and using partial or mismatched gaskets. A full kit helps mitigate these by providing the correct components and encouraging a systematic overhaul process. Other tips to avoid pitfalls:

• Follow torque-to-yield bolt replacement guidance where applicable.
• Use a calibrated torque wrench and follow manufacturer torque sequences.
• Document and label removed components to ensure correct reassembly.

Maintenance tips after installing an Overhaul Head Gasket Set

After rebuild, follow these maintenance best practices to prolong the life of the Overhaul Head Gasket Set:

• Perform initial warm-up and torque re-check if required by the head bolt specification.
• Monitor coolant and oil for contamination after the first 100–500 miles of operation.
• Inspect for external leaks visually during early service intervals.
• Maintain recommended coolant and oil changes to prevent premature gasket degradation.

How to source genuine or high-quality aftermarket Overhaul Head Gasket Sets

Purchasing guidance:

• Buy from reputable distributors with clear return and warranty policies.
• Request material specifications if durability is a concern (MLS, valve seal compound, etc.).
• Compare part numbers against Mitsubishi parts catalogs and cross-reference ME999995 to the engine serial number.
• Check for technical documentation and fitment guides provided by the supplier.

FAQ — Frequently Asked Questions about Overhaul Head Gasket Sets and ME999995

Q: Is the WTA ME999995 kit compatible with all 4D33 variants?

A: ME999995 is designed for the 4D33 New Type. Confirm compatibility by cross-referencing your engine serial number and consulting supplier or dealer fitment charts. Some earlier or variant revisions of the 4D33 may require different gasket profiles.

Q: Can I reuse head bolts when installing a new head gasket?

A: Many modern head bolts are torque-to-yield and should be replaced. Always follow the engine’s repair manual. Reusing stretch bolts can lead to incorrect clamping force and eventual failure.

Q: How long should I wait to re-torque head bolts after installation?

A: Some manufacturers require an initial re-torque after a specified run-in period; others mandate replacing bolts and do not allow re-torque. Follow the specific guidance for the 4D33 or the kit documentation.

Q: What causes head gasket failure after an overhaul?

A: Common causes include improperly machined head/block surfaces, incorrect torque procedure, defective bolts, overheating, or use of a mismatched gasket. Using a complete, engine-specific kit reduces the chance of these issues.

Q: Will a full overhaul gasket kit include the oil pan gasket?

A: Some full kits do and some do not. The ME999995 is described as a full complete head gasket set — confirm exact contents with your supplier if oil pan gasket inclusion is important for your job.

Contact and product CTA

For genuine WTA Mitsubishi Overhaul Full Complete Head Gasket Set for 4D33 New Type ME999995, technical fitment assistance, or to request a parts list and price quote, contact our sales team or view the product page. Our technicians can verify fitment for your engine serial number and provide installation guidance.

Contact us: • View product:

Authority references

• Head gasket — Wikipedia: https://en.wikipedia.org/wiki/Head_gasket
• Internal combustion engine — Wikipedia: https://en.wikipedia.org/wiki/Internal_combustion_engine
• Mitsubishi Motors official site: https://www.mitsubishi-motors.com/en/
• Society of Automotive Engineers (SAE) — https://www.sae.org/

Note: For precise part numbers and fitment details always consult the engine repair manual, OEM parts diagrams, or a certified Mitsubishi service center.